Attaching the outer stem.

Resawing the keel stock.

Attaching keel, first layer.

Drilling alignment holes for centerboard trunk.

Keel, aft end; transom sanded flush.

Meeting the alignment holes.

Making plywood pattern for the centerboard trunk. (Using the original Mylars.)

Patterns for trunk sides, rudder, centerboard.

Pattern-routing the trunk logs.

Trunk posts.

Dry fit.

Ready for taking apart, then glue and screws.

Final assembly.

Assembled.

Installing the centerboard trunk.

Glued up blank for the deadwood.

Glued-up blank meets full-size pattern.

Fairing the deadwood.

Deadwood installed; puttying holes.

Rightside up! Installing the sheer clamps.